Peak Well Systems Blog

A National Oil Company with operations in offshore Africa experienced a Tubing Retrievable Surface Controlled Sub-Surface Safety Valve (TRSCSSSV) failure on its subsea well at 951m, with 7000bopd production locked in.

Peak 's key objective was to offer a cost effective solution which included setting a new type of valve in place of a full workover, in a challenging subsea environment.

An International Oil Producer with operations in Africa encountered wellbore leakage issues within the completion string in one of their offshore wells.

Peak provided an efficient and effective rig-less solution utilising the SIM Retrieveable Bridge Plug to isolate and stabilse the leak path whilst ensuring the intervention was carried out safely and with zero downtime.

Have you encountered difficulties setting a plug in a high deviation well?

If so, Peak can help.

We assisted a National Oil Company in Brunei set their 3-1/2" SIM Plug (nippleless plug) using mechanical slickline in order to isolate a failed inflow valve in a high devation gas well. The object of the exercise for the Customer was to evaluate the reservoir data as justification for future stimulation.

Have you encountered well intervention problems due to difficulties in accessing the deeper sections of high angle wells?

Peak addresses these problems by offering friction-reducing well intervention tools and tools specifically designed to operate at high angles where wire manipulation is limited.

We have developed advanced roller systems with more reliability and functionality than other products and conveyance options available to the market.  The unique design of Peak’s Roller Systems offer several significant benefits, ultimately leading to near-zero friction.

A Customer was retrieving a bridge plug and injection valve to surface when the injection valve separated from the plug and landed at the 5-1/2" by 4-1/2" tubing crossover at 10,400ft.

An efficient method to fish the injection valve without causing damage to the tubing crossover was required so the injection value could be pulled and a new injection valve set.